Nema 17 JKISC42-R1A3 Integrated Stepper Servo Motor 42x42x54mm RS485 Modbus Control 1.33A 0.26N.m with Built-in Driver

Jkongmotor nema 17  JKISC42-R1A3（RS485 / Modbus Control）42x42x54mm integrated stepper servo motor with RS485 control 1.8Degree 1.33A 2.1Ω 0.26N.m with 1000 PPR / 17bit / 15bit integrated driver. For more different integrated servo motor requirements please contact us!!!

Differences between ISS and ISC Series:

Electrical Specifications：

• Type: Nema17 integrated stepper servo motor with built-in driver

• Model Name: JKISC42-R1A3 RS485 Modbus

• Phase: 2

• Step Angle: 1.8 degree

• Current: 1.33A

• Resistance: 2.1Ω±10%(20℃)

• Inductance: 2.5mH±20%(1kHz 1V RMS) 

• Holding Torque: 0.26Nm(36.81oz.in)

• Encoder: 1000ppr / 17Bit / 15Bit

• Control Method: RS485 (Pulse, CANopen optional)
  

  
  

Physical Specifications:

• Frame Size: Nema 17 (42 x 42mm)

• Body Length: 54mm

• Shaft Diameter: 5mm

• Shaft Length: 24mm
  

  
  

Integrated Stepper Servo Motors Features:

• Cortex-M4 core high-performance 32-bit micro controller

• The highest pulse response frequency can reach 200KHz
  

• Built in protection function, effectively ensuring the safe use of the device
  

• Intelligent current regulation to reduce vibration, noise, and heat generation

• Adopting low internal resistance MOS, the heating is reduced by 30% compared to ordinary products

• Voltage range: DC12V-36V

• Integrated design with integrated drive motor, easy installation, small footprint, and simple wiring

• Equipped with anti reverse connection function
  

Communication method:

• Pulse type

• RS485 MOdbus RTU network type

• CANopen network type
  

  
  

Protection level:

Waterproof type: IP30, IP54, IP65, optional