Nema 23 JKISC57-P2A3 Integrated Linear Motion with Integrated Stepper Servo Motor 57x57x75mm 2.8A 1.2N.m with Pluse Control

JKISC57-P2A3 is a higher-torque integrated linear stepper motor and lead screw slider module motor with Pulse control. It provides 1.2 Nm rated torque with a 1.8° step angle, 2.8 A phase current, 0.9 Ω phase resistance, and 3 mH phase inductance. The motor has a 75 mm body length and 0.8 kg weight, providing increased torque capacity for linear mechanisms compared with the smaller S2 configuration. The integrated 1000 ppr / 17-bit / 15-bit encoder supports feedback-based positioning and motion monitoring. As a screw-driven stepper motor, it can be integrated into linear positioning stages, lifting mechanisms, dispensing equipment, inspection machines, and automation modules. JKISC57-P2A3 is particularly suitable for OEM designers looking for a Pulse-controlled NEMA 23 linear stepper motor, lead screw motor, integrated linear actuator, or stepper slider module.

Electrical Specifications：

• Type: Nema23 stepper motor with built-in driver

• Model Name: JKISC57-P2A3

• Phase: 2

• Step Angle: 1.8 degree

• Voltage: 2.52V

• Current: 2.8A

• Resistance: 0.9Ω±10%(20℃)

• Inductance: 3mH±20%(1kHz 1V RMS) 

• Holding Torque: 1.2Nm(77.89oz.in)

• Encoder: 1000ppr / 17Bit

• Control Method: Pluse (RS485, Pulse optional)
  

  
  

Physical Specifications:

• Frame Size: Nema 23 (57x57mm)

• Body Length: 75mm

• Shaft Diameter: 8mm

• Shaft Length: 21mm
  

  
  

Integrated Stepper Servo Motors Features:

• Cortex-M4 core high-performance 32-bit micro controller

• The highest pulse response frequency can reach 200KHz
  

• Built in protection function, effectively ensuring the safe use of the device
  

• Intelligent current regulation to reduce vibration, noise, and heat generation

• Adopting low internal resistance MOS, the heating is reduced by 30% compared to ordinary products

• Voltage range: DC12V-36V

• Integrated design with integrated drive motor, easy installation, small footprint, and simple wiring

• Equipped with anti reverse connection function
  

Communication method:

• Pulse type

• RS485 MOdbus RTU network type

• CANopen network type
  

  
  

Protection level:

Waterproof type: IP30, IP54, IP65, optional

57mm Integrated Stepper Servo Motors Usage:

Medical equipment, logistics transportation, industrial automation, textile machinery, laser, drawing, traditional Chinese medicine ingredient industry, etc