Current: 0.67A
Motor Length: 32mm / 45mm / 51mm
Nema 11 Closed Loop Stepper Motor
JKONGMOTOR
Closed Loop Motors
Nema11 (28mm)
4wires
2 phase
1.8°
10 Pcs
Availability: | |
---|---|
Item | Specifications |
Step Angle | 1.8° |
Temperature Rise | 80℃max |
Ambient Temperature | -20℃~+50℃ |
Insulation Resistance | 100 MΩ Min. ,500VDC |
Dielectric Strength | 500VAC for 1minute |
Shaft Radial Play | 0.02Max. (450g-load) |
Shaft Axial Play | 0.08Max. (450g-load) |
Max. radial force | 28N (20mm from the flange) |
Max. axial force | 10N |
Model No. | Step Angle | Motor Length | Current | Resistance | Inductance | Holding Torque | # of Leads | Rotor Inertia | Mass |
( °) | (L)mm | A | Ω | mH | g.cm | No. | g.cm2 | Kg | |
JK28HSN006 | 1.8 | 32 | 0.67 | 5.6 | 3.4 | 600 | 4 | 9 | 0.11 |
JK28HSN009 | 1.8 | 45 | 0.67 | 6.8 | 4.9 | 950 | 4 | 12 | 0.14 |
JK28HSN012 | 1.8 | 51 | 0.67 | 9.2 | 7.2 | 1200 | 4 | 18 | 0.2 |
Note: Above only for representative products, products of special request can be made according to the customer request.
A+ | A- | B+ | B- |
Black | Green | Red | Blue |
Item | Specifications |
Step Angle | 1.8° |
Temperature Rise | 80℃max |
Ambient Temperature | -20℃~+50℃ |
Insulation Resistance | 100 MΩ Min. ,500VDC |
Dielectric Strength | 500VAC for 1minute |
Shaft Radial Play | 0.02Max. (450g-load) |
Shaft Axial Play | 0.08Max. (450g-load) |
Max. radial force | 28N (20mm from the flange) |
Max. axial force | 10N |
Model No. | Step Angle | Motor Length | Current | Resistance | Inductance | Holding Torque | # of Leads | Rotor Inertia | Mass |
( °) | (L)mm | A | Ω | mH | g.cm | No. | g.cm2 | Kg | |
JK28HSN006 | 1.8 | 32 | 0.67 | 5.6 | 3.4 | 600 | 4 | 9 | 0.11 |
JK28HSN009 | 1.8 | 45 | 0.67 | 6.8 | 4.9 | 950 | 4 | 12 | 0.14 |
JK28HSN012 | 1.8 | 51 | 0.67 | 9.2 | 7.2 | 1200 | 4 | 18 | 0.2 |
Note: Above only for representative products, products of special request can be made according to the customer request.
A+ | A- | B+ | B- |
Black | Green | Red | Blue |
Connectors, Gearbox, Encoder, Brake, Integrated Driver...
Metal Pulleys
Plastic Pulley
Gear
Shaft Pin
Threaded Shaft
Panel Mount
Hollow Shaft
Threaded Shaft
Panel Mount
Single Flat
Dual Flat
Key Shaft
Cables
Flanges
Shaft
Lead Screw Rod
Encoders
Brakes
Gearboxes
Motor Kits
Integrated Drivers
More Customized
Connectors, Gearbox, Encoder, Brake, Integrated Driver...
Metal Pulleys
Plastic Pulley
Gear
Shaft Pin
Threaded Shaft
Panel Mount
Hollow Shaft
Threaded Shaft
Panel Mount
Single Flat
Dual Flat
Key Shaft
Cables
Flanges
Shaft
Lead Screw Rod
Encoders
Brakes
Gearboxes
Motor Kits
Integrated Drivers
More Customized
JK-HSD57 Closed Loop Stepper Motor Driver
JK-HSD57 Closed Loop Stepper Motor Driver
© COPYRIGHT 2025 CHANGZHOU JKONGMOTOR CO.,LTD ALL RIGHTS RESERVED.