• To Share:
  • |
JKM Nema34 T-type Lead Screw Motor
    • JKM Nema34 T-type Lead Screw Motor
    • JKM Nema34 T-type Lead Screw Motor
    • JKM Nema34 T-type Lead Screw Motor
    • JKM Nema34 T-type Lead Screw Motor
    • JKM Nema34 T-type Lead Screw Motor
    • JKM Nema34 T-type Lead Screw Motor
Product Details

Model: 2 Phase Hybrid Nema 34 Linear Stepper Motor Cnc Kit with External Lead Screw JK86HST(1.8 degree)

A Nema 34 stepper motor is a stepper motor with a 3.4 x 3.4 inch (86 x 86mm) faceplate. Nema 34 high torque stepper motors deliver great value with no quality sacrifice. These motors are engineered to provide the highest possible torque but minimize vibration and audible noise.

The decision between NEMA 23 and NEMA 34 motors is primarily a decision about productivity -- NEMA 34 motors can remove material at a higher rate using higher feed rates and deeper cut depths.

Jkongmotor provides high-quality leadscrews and nuts, opening up new avenues for equipment designers who need high performance and superior durability. The Jkongmotor's actuators generate more force than similar actuators due to their special stator geometry and optimized magnet materials.

Jkongmotor Products range of 86m (NEMA34) Hybrid stepper motors are ideal for applications where size and cost is an important factor. JKONGMOTOR's NEMA 34 stepepr motors can be supplied with a variety of housings, single or double shaft options, winding configurations and IP rating options, JKONGMOTOR can also provide other stepper motor or bldc motor customized, such as brake, encoder, gearbox or integrated step motor...

Linear Stepper Motors: These stepper motors with linear motion are open-loop systems with a base and a slider. They provide high speeds and resolutions. The sliders are also called forcers which contain a permanent magnet, teeth, and motor windings.

There are four types of linear stepper motors: external drive linear stepper motors (including T-type lead screw and ball screw), Captive linear stepper motors and Non-Captive linear stepper motor, and the connector, gearbox, encoder, brake orintegrated driver are optional.

A stepper motor is a device used for precise motion control, while a linear actuator is a linear motion device used for simple linear motion applications. They differ in construction, feedback, and force and speed characteristics, among other factors.

Linear motors are commonly used for actuating high performance industrial automation equipment. Their advantage, unlike any other commonly used actuator, such as a ball screw, timing belt, or rack and pinion, is that they provide any combination of high precision, high velocity, high force and long travel.


Product Name: Nema 34 Linear Stepper Motor Kits with T-type Lead Screw

Size: 86x86mm Stepper Motor

Holding Torque: 3.2N.m ~ 13N.m

Leads No.: 4leads

Motor Length: 78mm / 97mm / 115mm / 155mm

Product Type: 2 Phase Hybrid Stepping Motor

Customized Parts: Connector, Gearbox, Encoder, Brake, Integrated driver...

General Specifiction:



Step Angle


Temperature Rise


Ambient Temperature


Insulation Resistance

100 MΩ Min. ,500VDC

Dielectric Strength

820VAC for 1minute

Shaft Radial Play

0.02Max. (450g-load)

Shaft Axial Play

0.08Max. (450g-load)

Max. radial force

220N (20mm from the flange)

Max. axial force


Electrical Specification:

Model No.Step AngleMotor LengthCurrentResistanceInductanceHolding Torque# of LeadsDetent TorqueRotor InertiaMass
( °)(L)mmAΩmHN.mNo.Kg.cmg.cm2Kg

Note: Above only for representative products, products of special request can be made according to the customer request.

Screw Road Specification:

Screw DiameterScrew LeadScrew PitchTravel per stepScrew DiameterScrew LeadScrew PitchTravel per step

Note: Above only for representative products, products of special request can be made according to the customer request.

Feature summary:

Feature summary:Low Inertia, Quick Response; High Torque, High Efficiency; Low Vibration, Low Noise.

Minimum order quantity:10pcs

Material Science:stator, rotor, stainless steel shaft, copper wire, magnetic steel...

Applicatin Scope: 3D Printers, Monitor Equipment, Medical Machinery, Textile Machinery, Packaging Machinery,  Lighting, ect.

Packing:The sample is packed in carton,the batch with plastic pallet

Delivery time:Standard product: 7-10days

Customized product: 25-30days

Transaction mode:EXW, FOB, FCA, CIF, FAS, CFR, CPT, CIP, DAF, DEQ, DDU, DDP...

Different Types:

lead screw and stepper motor calculation

Feature summaryHigh torque; High stability; Easy to plug...

Customized Design:

If this motor do not match with your request. Please feel free to contact with us,We can make customized shaft / winding / mounting flange / cable / connector / Encoder / Brake / Gearbox and others. We will works side-by-side with you and your team to design a motor that will fit the precise needs of your application. All Engineering and Support is done in-house.

hybrid stepper motor

Customized Shaft Types:

nema8 stepper motor

stepper motor shaft

Matched Drivers:

2 Phase Stepper Motor driver Model:  JKD5056S / DM860H / JKD7208S / JKD2060H

Inquiry Now
Message *
Name *
>>Drag the slider to verify<<
Other Products
New Products
Copyright and all rights reserved. Without the written permission, any part of this website content forbid reproduced or copied in any purposes, investigate and affix legal liability.