- To Share:
- |
Model: 23W ~ 200W 57mm JK57BLS Round 36V Brushless DC Motor 57x57mm 12v 24v 48v with Planetary Gearbox Reducer
An effective modification that will increase torque significantly is to install a turbo or supercharger. Forced induction forces air into your engine, increasing the power the engine provides. Depending on the torque curve you prefer, a turbocharger will need time to spool before it provides torque benefits
A gear train can be analyzed using the principle of virtual work to show that its torque ratio, which is the ratio of its output torque to its input torque, is equal to the gear ratio, or speed ratio, of the gear train.
While in many applications gear reduction reduces speed and increases torque, in other applications gear reduction is used to increase speed and reduce torque.
36V Brushless Dc Motor General Specification:
BLDC Motor General Specification | |
Item | Specification |
Winding type | Star |
Hall effect angle | 120 degree electrical angle |
Shaft run out | 0.025mm |
Radial play | 0.02mm＠450g |
End play | 0.08mm＠450g |
Max.radial force | 75N ＠20mm form the flange |
Max.axial force | 15N |
Insulation class | Class B |
Dielectric strength | 500VDC for one minute |
Insulation resistance | 100MΩ Min.,500VDC |
High Torque Brushless Dc Motor Electrical Specification:
36V Brushless DC Motor Electrical Specification: | ||||||
Specification | Unit | Model | ||||
JK57BLS005 | JK57BLS01 | JK57BLS02 | JK57BLS03 | JK57BLS04 | ||
Number Of Phase | Phase | 3 | ||||
Number Of Poles | Poles | 4 | ||||
Rated Voltage | VDC | 36 | ||||
Rated Speed | Rpm | 4000 | ||||
Rated Torque | N.m | 0.055 | 0.11 | 0.22 | 0.33 | 0.44 |
Rated Current | Amps | 1.2 | 2 | 3.6 | 5.3 | 6.8 |
Rated Power | W | 23 | 46 | 92 | 138 | 184 |
Peak Torque | N.m | 0.16 | 0.33 | 0.66 | 1 | 1.32 |
Peak Current | Amps | 3.5 | 6.8 | 11.5 | 15.5 | 20.5 |
Back E.M.F | V/Krpm | 7.8 | 7.7 | 7.4 | 7.3 | 7.1 |
Torque Constant | N.m/A | 0.074 | 0.073 | 0.07 | 0.07 | 0.068 |
Rotor Inertia | g.c㎡ | 30 | 75 | 119 | 173 | 230 |
Body Length | mm | 37 | 47 | 67 | 87 | 107 |
Weight | Kg | 0.33 | 0.44 | 0.75 | 1 | 1.25 |
Sensor | Honeywell | |||||
Insulation Class | B | |||||
Degree of Protection | IP30 | |||||
Storage Temperature | -25～+70℃ | |||||
Operating Temperature | -15～+50℃ | |||||
Working Humidity | 85% RH or below (no condensation) | |||||
Working Environment | Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust | |||||
Altitude | 1000 meters or less | |||||
Note: Above only for representative products, products of special request can be made according to the customer request.
General Specification of 57mm High Precision Planetary Gearbox Reducer:
| 56JXE300K | |
| Ring material | Metal |
| Bearing at output | Ball bearings |
| Max. Radial (12mm from flange) | 300N |
| Max. shaft axial load | 200N |
| Radial play of shaft (near to flange) | ≤0.08mm |
| Axial play of shaft | ≤0.4mm |
| Backlash at no-load | ≤2.5° |
| Shaft press fit force, max | 300N |
57BLS BLDC Motor Gearbox Planetary Electrical Specification:
| Gearbox Specifications: | ||||||
| Reduction ratio | Exact reduction ratio | Rated tolerance torque | Max momentary tolerance torque | Efficiency | L (mm) | Weight (g) |
| 1/3.6 1/4.25 1/5.33 | 1/3.6 1/4.25 1/5.33 | 3 N.m Max | 9 N.m | 90% | 37.8±0.5 | 489 |
| 1/13 1/15 1/18 1/23 1/28 | 1/12.96 1/15.30 1/18.06 1/22.67 1/28.44 | 12 N.m Max | 36 N.m | 81% | 49.5±0.5 | 681 |
| 1/43 1/52 1/61 1/72 1/96 1/121 | 1/42.69 1/51.84 1/61.20 1/72.25 1/96.33 1/120.89 | 24 N.m Max | 72 N.m | 73% | 60.8±0.5 | 871 |
| 1/154 1/187 1/220 1/260 1/307 | 1/153.69 1/186.62 1/220.32 1/260.10 1/307.06 | 30 N.m Max | 90 N.m | 66% | 71.9±0.5 | 1066 |
| Input & output same rotation direction; Motor Max. input speed: <6000rpm; Operating temperature range: -15℃ ~ +80℃ | ||||||
12V 24V 36V 48V Brushless Motor Shaft of Planetary Gearbox Reducer Specification:
| 57mm Brushless Motor Shaft Pinion Specifications | |||
| Module | 1 | ||
| No. of teeth | 12 | 15 | 9 |
| Pressure angle | 20° | ||
| Hole diameter | Φ6H7 | ||
| Reduction ratio | 1/4.25 1/15 1/18 1/23 1/52 1/61 1/72 1/96 1/121 1/220 1/260 1/307 | 1/3.6 1/13 1/43 1/154 1/187 | 1/5.33 1/28 |
Mini Planetary Gearbox Drawing:
JK57BLS 36V Brushless DC Motor Shaft Dimensions: (Unit=mm)
Product Parameters:
Product Type: JK57BLS Small Planetary Gearbox Reducer for Geared BLDC Motor
Size：57x57mm
Place of Origin：china
Minimum order quantity：10pcs
Material Science：stator, rotor, stainless steel shaft, copper wire, magnetic steel...
Feature summary: Low Inertia,Quick Feedback; High Torque,High Efficiency; Small Vibration,Low Noise
Packing：The sample is packed in carton,the batch with plastic pallet
Delivery time：Standard product: 7-10days
Customized product: 25-30days
Transaction mode：EXW, FOB, FCA, CIF, FAS, CFR, CPT, CIP, DAF, DEQ, DDU, DDP...
APPLICATION：Medical equipment: medical pumps, stirring instruments, peristaltic pumps, biopharmaceutical equipment. Industrial equipment: winding machines, printing machines, robots, grinding, cutting, drilling, automatic conveying systems, automatic positioning systems, level control systems, electric actuators, electric valves, vending machines.
Product Dimensions: (Unit=mm)
Customized Design:
If this motor do not match with your request. Please feel free to contact with us,We can make customized shaft / winding / mounting flange / cable / connector / Encoder / Brake / Gearbox and others. We will works side-by-side with you and your team to design a motor that will fit the precise needs of your application. All Engineering and Support is done in-house.
Customized Shaft Types:
Matched Drivers:
Brushless DC Motor driver Model: JKBLD70 / JKBLD120 / JKBLD300
