- To Share:
- |
JK86BLS71-24+ driver board with RS485, high and low voltage safety isolation; vector non-inductive FOC motor control, 400W 220VAC, power up to 400w
A brushless DC motor is essentially flipped inside out, eliminating the need for brushes to flip the electromagnetic field. In brushless DC motors, the permanent magnets are on the rotor, and the electromagnets are on the stator.
It is high performance motor that provides large torque per cubic inch over a vast sped rang. BLDC motors do not have brushes which make it more reliable, high life expectancies, and maintenance free operation. There is no ionizing sparks from the commutator, and electromagnetic interference is also get reduced.
1. Parameters of 86mm Brushless dc Motor：
| Model: | JK86BLS71-24 | Voltage: | 220VAC |
| Torque: | 0.7N.m | Speed: | 3000Rpm |
| Current: | 6.3A | Power: | Up to 400W |
| Body Length: | 84.5mm | Type: | Brushless Dc Motor with RS485 |
Customized Design: Customization accept, such as encoder, various gearbox, brake, or other parameters customer need.
2. Parameters of 48V Brushless dc Motor：
| Electrical Specification: | ||||||
| Specification | Unit | Model | ||||
| JK86BLS58 | JK86BLS71-X001 | JK86BLS84 | JK86BLS98-X015 | JK86BLS125-X015 | ||
| Number Of Phase | Phase | 3 | ||||
| Number Of Poles | Poles | 8 | ||||
| Rated Voltage | VDC | 48 | ||||
| Rated Speed | Rpm | 3000 | ||||
| Rated Torque | N.m | 0.35 | 0.7 | 1.05 | 1.56 | 2.1 |
| Rated Current | Amps | 3 | 6.3 | 9 | 11.5 | 18 |
| Rated Power | W | 110 | 220 | 330 | 490 | 660 |
| Peak Torque | N.m | 1.05 | 2.1 | 3.15 | 4.2 | 6.3 |
| Peak Current | Amps | 9 | 19 | 27 | 35 | 54 |
| Back E.M.F | V/Krpm | 13.7 | 13 | 13.5 | 13.7 | 13.5 |
| Torque Constant | N.m/A | 0.13 | 0.12 | 0.13 | 0.13 | 0.13 |
| Rotor Inertia | g.c㎡ | 400 | 800 | 1200 | 1600 | 2400 |
| Body Length | mm | 71 | 84.5 | 98 | 111.5 | 138.5 |
| Weight | Kg | 1.5 | 1.9 | 2.3 | 2.7 | 4 |
| Sensor | Honeywell | |||||
| Insulation Class | B | |||||
| Degree of Protection | IP30 | |||||
| Storage Temperature | -25～+70℃ | |||||
| Operating Temperature | -15～+50℃ | |||||
| Working Humidity | 85% RH or below (no condensation) | |||||
| Working Environment | Outdoor (no direct sunlight), no corrosive gas, no flammable gas, no oil mist, no dust | |||||
| Altitude | 1000 meters or less | |||||
3. Customized Design:
If this motor do not match with your request. Please feel free to contact with us,We can make customized shaft / winding / mounting flange / cable / connector / Encoder / Brake / Gearbox and others. We will works side-by-side with you and your team to design a motor that will fit the precise needs of your application. All Engineering and Support is done in-house.
4. Customized Shaft Types:
