• To Share:
  • |
Product
Categories
JKM IP65 Nema23 Waterproof Stepper
    • JKM IP65 Nema23 Waterproof Stepper
    • JKM IP65 Nema23 Waterproof Stepper
    • JKM IP65 Nema23 Waterproof Stepper
    • JKM IP65 Nema23 Waterproof Stepper
    • JKM IP65 Nema23 Waterproof Stepper
    • JKM IP65 Nema23 Waterproof Stepper
Product Details

Model: 1.8 Deg IP65 Nema 23 Waterproof Stepper Motor with Gearbox Brake Encoder 57x57mm for Waterproof and Dustproof Industry -JK57HSW(1.8 degree)

IP65 stepper motors are dust tight motors that have zero ingress of dust permitted and are protected against water jets from any directions. JKONGMOTOR provides NEMA 17 NEMA 23 NEMA 34 IP65 rated stepper motors with sealed laminations and shielded cable. Customized options for shaft, mounting and holding torque are also available upon request. Our IP65 steppers are ideal for outdoor motion control applications and wet factory environments.

Below are some typical applications of waterproof stepper motor:
Drug Manufacturing,Machine Tools,Marine Submersion,Paper Making,Film Processing,Chemical Manufacturing,food and beverage packaging industry,computer embroidery machine.

Due to the preponderance of water and solvents, motion control components are often exposed to the high risk of corrosion and failure. At the same time, the waterproof motors are a key part of the solution to water-induced motor failure problems. Since automation of industrial processes often will require automation equipment to operate in the presence of water and aqueous fluids, the waterproof stepper motor is especially important in some industries.

Stepper motors are normally constructed of magnetic iron, and will corrode very easily when subjected to the moisture. To optimize torque, the gap between the rotating and non-rotating teeth of the motor is held to about .002 in. When the motor is operating, these teeth get hot, and the temperature is typically high enough to turn any water in the motor into steam. Steam is corrosive, such that the magnetic iron in the teeth rusts faster than usual. Then in order to avoid this, a waterproof motor is designed to accommodate O-ring seals, allowing the watertight sealing that is not practical in a standard motor. Besides, the wiring that leads to the motor coils in a waterproof motor requires a hermetically-sealed feed-through device to prevent water from wicking into the motor via the cable conductors.

In the meantime, waterproof stepper motor has many advantages of low torque, fast start-up response, low noise, stable operation, good control performance and low cost of the whole machine.


Features:

Product Name: 1.8degree Nema 23 IP65 Waterproof Stepper Motor with Gearbox / Brake / Encoder

Other Parts: Gearbox and encoder and brake may be fitted as required

Model Name: IP65 Stepper Motor for Waterproof and Dustproof Applications

Size: 57x57mm Stepping Motor

Current / Phase: 2.8A / 3A or customized

Holding Torque: 1N.m / 3N.m or customized

Leads No.: 4-leads

Motor Length: 51mm / 56mm / 76mm / 82mm / 100mm / 112mm

Product Type: 2 Phase Waterproof Stepper Motors

Type: 3d Printer Step Motor / Hybrid Stepping Motor


General Specification:

Item

Specifications

Step Angle

1.8°

Temperature Rise

80℃max

Ambient Temperature

-20℃~+50℃

Insulation Resistance

100 MΩ Min. ,500VDC

Dielectric Strength

500VAC for 1minute

Shaft Radial Play

0.02Max. (450g-load)

Shaft Axial Play

0.08Max. (450g-load)

Max. radial force

75N (20mm from the flange)

Max. axial force

15N


Electrical Specification:

Model No.Step AngleMotor LengthCurrentResistanceInductanceHolding Torque# of LeadsRotor InteriaMass
( °)(L)mmAΩmHN.mNo.g.cm2kg
JK57HSW51-28041.8512.80.832.2142300.59
JK57HSW56-28041.8562.80.931.242800.68
JK57HSW76-28041.8762.81.13.61.8944401.1
JK57HSW82-30041.88231.242.146001.1
JK57HSW100-30041.810030.7532.847001.3
JK57HSW112-30041.811231.67.5348001.4

Note: Above only for representative products, products of special request can be made according to the customer request.


Product Parameters:

Feature summary:Low Inertia、Low NoiseHigh Torque

Place of Origin:china

Minimum order quantity:10pcs

Material Science:stator, rotor, stainless steel shaft, copper wire, magnetic steel...

Applicatin Scope: 3D Printers, Monitor Equipment, Medical Machinery, Textile Machinery, Packaging Machinery,  Lighting, ect.

Packing:The sample is packed in carton,the batch with plastic pallet

Delivery time:Standard product: 7-10days

Customized product: 25-30days

Transaction mode:EXW, FOB, FCA, CIF, FAS, CFR, CPT, CIP, DAF, DEQ, DDU, DDP...


Product Dimensions: (Unit=mm)

waterproof stepper motor for cnc

Customized Design:

If this motor do not match with your request. Please feel free to contact with us,We can make customized shaft / winding / mounting flange / cable / connector / Encoder / Brake / Gearbox and others. We will works side-by-side with you and your team to design a motor that will fit the precise needs of your application. All Engineering and Support is done in-house.

hybrid stepper motor

Customized Shaft Types:

nema11 stepper motor

stepper motor shaft

Matched Drivers:

2 Phase Stepper Motor driver Model:  JKD5056SJKDM542

Inquiry Now
Message *
Name *
Phone
Email*
 
    
    
>>Drag the slider to verify<<
  
Other Products
New Products
Related News
1.Are Stepper Motors Waterproof?
Copyright and all rights reserved. Without the written permission, any part of this website content forbid reproduced or copied in any purposes, investigate and affix legal liability.