- To Share:
- |
Model: Pulse Modbus CANopen 1.8 Deg 2 phase Nema 23 Integrated Stepper Servo Motor with T-type Lead Screw 0.55Nm to 3Nm 1000ppr / 17bit Linear Servo Motor
Linear Stepper Motors:These stepper motors with linear motion are open-loop systems with a base and a slider. They provide high speeds and resolutions. The sliders are also called forcers which contain a permanent magnet, teeth, and motor windings.
They share most of the properties with stepper motors, although there are some differences. A stepper motor has a shaft, while a stepper actuator has a precision lead screw and precision nut which together facilitate linear motion.
Jkongmotor linear stepper motor including external linear stepper motor (T-type or Ball screw type), Non-captive linear stepper motor or Captive linear stepper motor, and the connector, gearbox, encoder, brake orintegrated driver are optional.
Overview:
1、Drive and motor integrated design, simplify system structure and improve system integration
2、Support multiple control modes including pulse/direction and bus control
3、Smooth and high-speed operation, precise positioning, no step lost and fast response
4、Low noise, adjust current in real time and reduce heat
Product Parameters:
Product Name: 1.8degree 57mm Nema 23 Integrated Stepper Servo Motor with Lead Screw
Model Name: STM integrated steppers
Size: 57x57mm Stepping Motor with Intelligent driver
Current / Phase: 2A to 4.2A
Motor Length: 65mm / 80mm / 100mm / 106mm / 124mm / 136mm
Product Type: 2 Phase integrated step servo motor / integrated stepper motor driver
Holding Torque: 0.55N.m ~ 3N.m
1、Features:
A new generation of 32-bit DSP technology.
Support standard MODBUS-RTU protocol.
4-way input function terminal, 2-way output function terminal.
The torque decay is reduced, and the speed can reach 3000rpm.
Built-in alarm output for easy monitoring and control.
Intelligently adjust current, reduce vibration, noise and heat, and increase efficiency by 35%.
Voltage range: DC12 - 36V.
16 adjustable subdivisions, the default is 1000pulse/r.
Excellent high speed and rigidity, perfect integration of servo and stepper.
With overvoltage, undervoltage, overcurrent and other protection functions.
Integrated design with drive motor. Easy installation, small footprint and simple wiring.
2、Nema 17 Integrated Stepper Motor Details:
3,Features of integrated easy servo stepper motor with controller driver:
1、Cortex-M4 core high-performance 32-bit micro controller
2、The highest pulse response frequency can reach 200KHz
3、Built in protection function, effectively ensuring the safe use of the device
4、Intelligent current regulation to reduce vibration, noise, and heat generation
5、Adopting low internal resistance MOS, the heating is reduced by 30% compared to ordinary products
6、Voltage range: DC12V-36V
7、Integrated design with integrated drive motor, easy installation, small footprint, and simple wiring
8、Equipped with anti reverse connection function
4、Traditional split solution：
5、Communication method:
1、Pulse type
2、RS485 MOdbus RTU network type
3、CANopen network type
Protection level:
Waterproof type: IP30, IP54, IP65, optional
6、Application of integrated servo stepper motor:
Medical equipment, logistics transportation, industrial automation, textile machinery, laser, drawing, traditional Chinese medicine ingredient industry, etc
7、General Specification of integrated step servo motor:
Model | step Angle (1.8°) | phase Current (A) | Rated Resistance (0) | Rated Torque (N.m) | Total body height L (mm) | Encoder | Control method (optional) | ||
JKISS57-P01A | 1.8 | 2 | 1.4 | 0.55 | 65 | 1000ppr/17bit | pulse | RS485 | CANopen |
JKISS57-P02A | 1.8 | 2.8 | 0.9 | 1.2 | 80 | 1000ppr/17bit | pulse | RS485 | CANopen |
JKISS57-P03A | 1.8 | 2.8 | 1.1 | 1.89 | 100 | 1000ppr/17bit | pulse | RS485 | CANopen |
JKISS57-P04A | 1.8 | 3 | 1.2 | 2.2 | 106 | 1000ppr/17bit | pulse | RS485 | CANopen |
JKISS57-P05A | 1.8 | 4.2 | 0.75 | 2.8 | 124 | 1000ppr/17bit | pulse | RS485 | CANopen |
JKISS57-P06A | 1.8 | 4.2 | 0.9 | 3 | 136 | 1000ppr/17bit | pulse | RS485 | CANopen |
Note: Above only for representative products, products of special request can be made according to the customer request.
Screw Rod Parameters:
| Screw Diameter | Screw Lead | Screw Pitch | Travel per step | Screw Diameter | Screw Lead | Screw Pitch | Travel per step |
| (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) |
| Tr8 | 0.5 | 0.5 | 0.0025 | TR9.525 | 0.635 | 0.635 | 0.003175 |
| 2 | 2 | 0.01 | 1.27 | 1.27 | 0.00635 | ||
| 4 | 2 | 0.02 | 1.5875 | 1.5875 | 0.0079375 | ||
| 8 | 2 | 0.04 | 2.54 | 2.54 | 0.0127 | ||
| 12 | 2 | 0.06 | 5.08 | 2.54 | 0.0254 | ||
| 20 | 2.5 | 0.1 | 6.35 | 3.175 | 0.03175 | ||
| Tr10 | 2 | 2 | 0.01 | 10.16 | 1.12 | 0.0508 | |
| 4 | 2 | 0.02 | 12.7 | 3.175 | 0.0635 | ||
| 10 | 2 | 0.05 | 25.4 | 3.175 | 0.127 | ||
| 12 | 3 | 0.06 | |||||
Note: Above only for representative products, products of special request can be made according to the customer request.
8、Product Dimensions: (Unit=mm)
9、Customized Design:
If this motor do not match with your request. Please feel free to contact with us,We can make customized shaft / winding / mounting flange / cable / connector / Encoder / Brake / Gearbox and others. We will works side-by-side with you and your team to design a motor that will fit the precise needs of your application. All Engineering and Support is done in-house.
10、Customized Shaft Types:
