Malti
Kurrent: 2.8A - 3.0A
Tul tal-Mutur: 41mm - 112mm
Personalizzat: Konnetturi, Gearbox, Encoder, Brake, Lead Screw, Driver Integrat...
Mutur Stepper Lineari Mhux Captive Nema 23
JKONGMOTOR
Muturi Lineari
Lineari Mhux Captive
Nema23 (57mm)
4wires
2 fażi
1.8°
10 Pcs
| Oġġett | Speċifikazzjonijiet |
| Angolu tal-pass | 1.8° |
| Żieda fit-temperatura | 80℃mass |
| Temperatura Ambjentali | -20℃~+50℃ |
| Reżistenza għall-iżolazzjoni | 100 MΩ Min. ,500VDC |
| Qawwa Dielettrika | 500VAC għal minuta |
| Play Radjali tax-xaft | 0.02Max. (450g-tagħbija) |
| Play Assjali tax-xaft | 0.08Max. (450g-tagħbija) |
| Max. forza radjali | 75N (20mm mill-ħanek) |
| Max. forza assjali | 15N |
| Mudell Nru. | Angolu tal-pass | Tul tal-Mutur | Kurrenti | Reżistenza | Induttanza | Holding Torque | # ta 'Leads | Detent Torque | Inerzja tar-rotor | Quddiesa |
| (°) | (L) mm | A | Ω | mH | Nm | Nru. | g.ċm | g.cm2 | Kg | |
| JK57HSC41-2804 | 1.8 | 41 | 2.8 | 0.7 | 1.4 | 0.55 | 4 | 250 | 150 | 0.47 |
| JK57HSC51-2804 | 1.8 | 51 | 2.8 | 0.83 | 2.2 | 1 | 4 | 300 | 230 | 0.59 |
| JK57HSC56-2804 | 1.8 | 56 | 2.8 | 0.9 | 2.5 | 1.2 | 4 | 350 | 280 | 0.68 |
| JK57HSC76-2804 | 1.8 | 76 | 2.8 | 1.1 | 3.6 | 1.89 | 4 | 600 | 440 | 1.1 |
| JK57HSC82-3004 | 1.8 | 82 | 3 | 1.2 | 4 | 2.1 | 4 | 1000 | 600 | 1.1 |
| JK57HSC100-3004 | 1.8 | 100 | 3 | 0.75 | 3 | 2.8 | 4 | 1100 | 700 | 1.3 |
| JK57HSC112-3004 | 1.8 | 112 | 3 | 1.6 | 7.5 | 3 | 4 | 1200 | 800 | 1.4 |
Nota: Fuq biss għal prodotti rappreżentattivi, prodotti ta 'talba speċjali jistgħu jsiru skond it-talba tal-klijent.
| Oġġett | Speċifikazzjonijiet |
| Angolu tal-pass | 1.8° |
| Żieda fit-temperatura | 80℃mass |
| Temperatura Ambjentali | -20℃~+50℃ |
| Reżistenza għall-iżolazzjoni | 100 MΩ Min. ,500VDC |
| Qawwa Dielettrika | 500VAC għal minuta |
| Play Radjali tax-xaft | 0.02Max. (450g-tagħbija) |
| Play Assjali tax-xaft | 0.08Max. (450g-tagħbija) |
| Max. forza radjali | 75N (20mm mill-ħanek) |
| Max. forza assjali | 15N |
| Mudell Nru. | Angolu tal-pass | Tul tal-Mutur | Kurrenti | Reżistenza | Induttanza | Holding Torque | # ta 'Leads | Detent Torque | Inerzja tar-rotor | Quddiesa |
| (°) | (L) mm | A | Ω | mH | Nm | Nru. | g.ċm | g.cm2 | Kg | |
| JK57HSC41-2804 | 1.8 | 41 | 2.8 | 0.7 | 1.4 | 0.55 | 4 | 250 | 150 | 0.47 |
| JK57HSC51-2804 | 1.8 | 51 | 2.8 | 0.83 | 2.2 | 1 | 4 | 300 | 230 | 0.59 |
| JK57HSC56-2804 | 1.8 | 56 | 2.8 | 0.9 | 2.5 | 1.2 | 4 | 350 | 280 | 0.68 |
| JK57HSC76-2804 | 1.8 | 76 | 2.8 | 1.1 | 3.6 | 1.89 | 4 | 600 | 440 | 1.1 |
| JK57HSC82-3004 | 1.8 | 82 | 3 | 1.2 | 4 | 2.1 | 4 | 1000 | 600 | 1.1 |
| JK57HSC100-3004 | 1.8 | 100 | 3 | 0.75 | 3 | 2.8 | 4 | 1100 | 700 | 1.3 |
| JK57HSC112-3004 | 1.8 | 112 | 3 | 1.6 | 7.5 | 3 | 4 | 1200 | 800 | 1.4 |
Nota: Fuq biss għal prodotti rappreżentattivi, prodotti ta 'talba speċjali jistgħu jsiru skond it-talba tal-klijent.
